EVA,PE,RUBBER,SBR,NBR,CR,EPDM,etc... foam Splitting.
*Automatic reciprocating and forward splitting Saves transfer time of raw material. Increases productivity.
*Automatically thickness adjusting PLC controls every splitting. Only leave 3mm on the table save labor than traditional loop splitting (transfer time).
*Only need one person for operation (collecting finished products). Save labor (a traditional type of needs one person to feed raw material block and two people to collect products).
* Friendly PLC inter-face, computer touch screes.Easy to operate.
* Thickness controlled and re-located by PLC.
* The position of blade controlled and re-located by PLC.
* Automatic Sliced Piece Counting Function.
* Dusty collector for blade sharpener.
*Close tolerance: +/- 0.05mm (When starting with level material)
|Model||Working width (mm)||
|Splitting Speed (M/Hr)||Max. Material Thickness (mm)||Splitting Hardness (Shore C)||Material Transfer Concept||
Min. Splitting Thickness (mm)
|Tolerance (mm)||Splitting Concept|
EVA, PE, PVC, RUBBER, CR, SBR, EPDM and similar material
Splitting thin sheet 0.2mm
Measure thickness 0.2mm
SM-682 AMS(Automatic Material Stocking)
|689E10||Blade Table Pusher Set(For 1.6M)|
|689F110||Diamond dresser Set For Grinding Wheel|
|689E30||Blade locator Pusher(Set)|